NPI45 Pellet Insert
Product Information
Straight from our Research & Development Team
With Napoleon’s advanced pellet technology and efficient heat exchanger, the Napoleon® pellet insert will have no problem living up to your “pellet performance” expectations. Napoleon’s pellet insert comes complete with a 120 CFM convection blower system, convenient auto ignitor, airwash system, stylish black trivet and dual painted black accent rods. It is convenient to use, easy to maintain and easy to fill without having to “refuel” for up to 45 hours!
EXCLUSIVE FEATURES
-
Four stage FAILSAFE™ system features:
1) an automatic blower over-ride switch
2) a high temperature limit switch
3) a low air pressure switch
4) a power failure safety shut down for your peace of mind
-
Thermostatic control capability via wall mount or easily installed hand-held thermostatic remote control
-
Digital control provides adjustment to both the fuel feed rate and combustion blower speed. This unique feature maximizes the insert’s performance when using lesser quality fuel. Even low grade fuel (although not recommended) can be burned in the NPI45 due to it’s ability to fine tune the fuel combustion air ratio
PRODUCT FEATURES
-
EPA exempt
-
Convenient top, loading for easy fueling
-
Automatic ignition
-
Insert hopper pellet capacity is 45 lbs. (capable of handling a full bag of pellets eliminating partial bags left open)
-
Variable speed auger and variable speed blower provide maximum comfort and control
-
Heavy-duty, 1/8” thick, seamless heat exchange tubes radiate heat into the room for maximum efficiency even after the insert is shut down
-
Hinged door for convenient access to combustion chamber for routine maintenance…
no tools required!
-
Handy cleaning/filling rake
-
Built-in heat exchange cleaner rod maintains cleanliness and efficiency of heat exchange tubes
-
Effective clean glass airwash system
-
Optional outside air kit with through the wall vent
-
Optional decorative PHAZER® ceramic log set
-
NPI40 can be top or rear vented and may also be installed as a zero clearance model in a framed cavity, without the use of additional shielding
-
President’s Limited Lifetime Warranty
OPTIONS & ACCESSORIES
|
|
|
Trivets
Painted Black (standard),
24 Karat Gold Plated and
Satin Chrome Plated Finishes |
Doors
Painted Black, 24 Karat
Gold Plated and Satin
Chrome Plated Finishes |
Cast Iron Surrounds
Painted Black and Porcelain
Enamel Majolica Brown Finishes |
|
|
|
Arched Cast Iron Surround
Painted Black Finish |
8″ Black Flashing with Trim |
PHAZER®
Decorative Ceramic Log Set |
|
|
|
F60 Remote Control
Adjusts Heat and On/Off |
Cast Iron Burn Pot
(Standard) |
Heat Exchange Tubes
(Standard) |
|
|
|
Firebox Diffuser Fins |
|
|
|
|
|
Decorative Sandstone
Brick Panels |
MIRRO-FLAME™
Porcelain Reflective Radiant Panels |
|
PRODUCT SPECIFICATIONS
|
|
Specifications
|
NPI45
|
Fuel |
Pellet |
BTU Output |
8,500 – 42,500 |
Hopper Capacity |
45 lbs |
Area Heated |
up to 2,000 sq. ft. |
Burn rate |
1-5 lbs per hour |
Burn time |
45 hours low heat |
Flue Diameter |
3″ |
Electrical rating |
115 volts, 3.6 Amps, 60 Hz |
Blower kit |
Included |
Mobile Home Approved |
Yes |
Additional Information
-
Small pellets will increase or decrease the stated burn rates and burn times
-
Differences of plus or minus 20% may occur depending on fuel quality
THIS HEATER HAD BEEN TESTED TO
ASTM E 1509, UL 1482, ULC S627 and ULC 5628
|
For more information please
contact us.