Napoleon NPS45 Pellet Stove
Product Information
Straight from our Research & Development Team
A renewable energy source, environmentally friendly, economical, convenient… these are just some of the reasons a Napoleon® pellet stove is the perfect solution to heat your home. The freestanding stove provides Zone Heating furnace performance and a reliable heating source. The NPS45 gives you uncompromising pellet performance year after year with the comfort of knowing you have selected a product made with true craftsmanship and advanced technological innovations.
EXCLUSIVE FEATURES
-
Four stage FAILSAFE™ system features:
1) an automatic blower over-ride switch
2) a high temperature limit switch
3) a low air pressure switch
4) a power failure safety shut down for your peace of mind
-
Thermostatic control capability via wall mount or easily installed thermostatic remote control
-
Digital control provides adjustment to both the fuel feed rate and combustion blower speed. This unique feature maximizes the stove’s performance when using lesser quality fuel. Even low grade fuel (although not recommended) can be burned in the NPS45 due to its ability to fine tune the fuel combustion air ratio
PRODUCT FEATURES
-
EPA exempt
-
Convenient top, loading for easy fueling
-
Automatic ignition
-
Stove hopper pellet capacity is 55 lbs (capable of handling a full bag of pellets eliminating partial bags left open)
-
Variable speed auger and variable speed blower provide maximum comfort and control
-
Heavy-duty, 1/8” thick, seamless heat exchange tubes radiate heat into the room for maximum efficiency even after the stove is shut down
-
Hinged door for convenient access to combustion chamber for routine maintenance…
no tools required!
-
Handy cleaning/filling rake
-
Built-in heat exchange cleaner rod maintains cleanliness and efficiency of heat exchange tubes
-
Effective clean glass airwash system
-
Optional hopper extension allows longer burn times without refilling providing a total loading
capacity of 80 lbs
-
Optional outside air kit with through the wall vent
-
Optional decorative PHAZER® ceramic log set
-
President’s Limited Lifetime Warranty
OPTIONS & ACCESSORIES
|
|
|
Ash Pan Door and Extra Large
Ash Pan (Standard) |
Door Finishes
Painted Black, 24 Karat
Gold Plated and Satin
Chrome Plated Finishes |
Trivets
Painted Black (standard),
24 Karat Gold Plated and
Satin Chrome Plated Finishes |
|
|
|
Cast Iron Burn Pot
(Standard) |
Hopper Extension
Increases Pellet Capacity
from 55lbs to 80lbs
|
PHAZER®
Decorative Ceramic Log Set |
|
|
|
F60 Remote Control
Adjusts Heat and On/Off |
Heat Exchange Tubes
(Standard) |
Firebox Diffuser Fins
(Standard) |
|
|
|
Decorative Sandstone
Brick Panel |
MIRRO-FLAME™
Porcelain Reflective
Radiant Panels |
|
PRODUCT SPECIFICATIONS
|
|
Specifications
|
NPS45
|
Fuel |
Pellet |
BTU Output |
8,500 – 42,500 |
Hopper Capacity |
55 lbs |
Area Heated |
up to 2,000 sq. ft. |
Burn rate |
1-5 lbs per hour |
Burn time |
55 hours low heat |
Flue Diameter |
3″ |
Electrical rating |
115 volts, 3.6 Amps, 60 Hz |
Blower kit |
Included |
Mobile Home Approved |
Yes |
Additional Information
-
Small pellets will increase or decrease the stated burn rates and burn times
-
Differences of plus or minus 20% may occur depending on fuel quality
THIS HEATER HAD BEEN TESTED TO
ASTM E 1509, UL 1482, ULC S627 and ULC 5628
|
Product Brochure
Product Manual
For more information please
contact us.